• 1986년부터 용융 비철금속 산업을 위한 테크니컬 세라믹 | 1986-2026년 40년의 우수성
  • 스페인 발렌시아
  • 2026년 곧 출시
  • 코펜하겐, 덴마크
  • +(45) 35 15 8085
  • 미국/캐나다 무료 전화
  • + 1 (833) 709-1399
0
0 항목
장바구니에 상품이 없습니다.
0
0 항목
장바구니에 상품이 없습니다.
Sialon Westofen 도징 튜브
Sialon 도징 튜브 | 질화규소 도징 튜브 | Sialon Westofen 도징 튜브 | Westofen 도징 튜브 | Striko Westofen 도징 튜브
striko westofen dosing tube

Sialon Westofen 도징 튜브

Sialon Westofen 도징 튜브
Categories: ,

당사는 Striko Westofen 및 Westomat dosing 퍼니스용 Sialon dosing 튜브를 제조합니다.

These dosing tubes offer a superior service life compared to Aluminium Titanate (AlTi) dosing tubes, which means considerably less downtime for manufacturing. With regards to Sialons, there is substitution of silicon by aluminum with corresponding atomic (melting temperature of aluminum) replacement of nitrogen by oxygen, to satisfy valency requirements. The resulting ‘solution’ has superior properties to the original pure solvent, syalon, silicon nitride or Si3N4. Silicon Nitride like Sialon ceramics have found extensive use in non-ferrous molten metal handling, particularly aluminum and its alloys, including metal feed tubes for aluminum die casting, burner and immersion heater tubes, injector and degassing for non-ferrous metals, thermocouple protection tubes, crucibles and ladles.

견적 요청에 대해 자세히 설명해 주세요:

도면을 업로드해 주세요

제품 설명

로더 아이콘

Sialon Westofen Dosing Tubes for Striko Westomat Furnaces – Superior Lifespan vs Aluminium Titanate, 2–3 Years Service, 12-Month Warranty.

Sialon Westofen Dosing Tubes are premium silicon nitride-based ceramic tubes specially manufactured for Striko Westofen and Westomat dosing furnaces in the molten non-ferrous industry (primarily aluminium at 660.3 °C melting point). They provide dramatically longer service life than standard Aluminium Titanate (AlTi) tubes, virtually eliminating clogging and reducing manufacturing downtime to a minimum.

Developed specifically to solve the short lifespan and frequent clogging problems of AlTi tubes in clean, closed Westomat systems, these low-thermal-conductivity Sialon tubes allow easy setup, operation and integration into any die casting or gravity casting line. The Westomat removes metal below the bath surface, preventing contamination – Sialon dosing tubes enhance this clean process with non-wetting surfaces, zero water absorption and outstanding corrosion/erosion resistance. Customers routinely report 2–3 years continuous service with minimal cleaning. Compatible with Sialon Immersion Heaters for furnace heating, ultrasonic degassing and hydrogen measurement devices.

Sialon’s unique composition (partial substitution of silicon by aluminium and nitrogen by oxygen) delivers superior properties over pure Si₃N₄: high strength, thermal shock resistance and durability in aggressive molten aluminium environments. Full technical specifications (ULTRA™ grades):

  • 부피 밀도: 3.1–3.3 g/cm³
  • 수분 흡수율: 0 %
  • 굽힘 강도: 580–1,020 MPa
  • 비커스 경도: 12.7–15.0 GPa
  • 파괴 인성: 4–7 MPa·m¹/²
  • 영률: 270–300 GPa
  • 선형 열팽창 계수 (40–800 °C): 3.2–3.5 ×10⁻⁶/°C
  • 열전도율 (20 °C): 23–54 W/(m·K)
  • 열충격 저항: 550–900 °C
  • 체적 저항률 (20 °C): >10¹⁴ Ω·cm

Since 1986, these tubes have been the preferred choice for foundries seeking maximum reliability, lowest maintenance and best price/performance. View Sialon Westofen Dosing Tubes – custom lengths, diameters and mounting options available on request. Standard 12-month warranty against chemical attack.

재료 데이터 시트 Sialon (Si3Al3O3N5)

대표적인 Sialon ULTRA™ 등급

 ULTRA-001 ULTRA-002 ULTRA-003 ULTRA-004
부피 밀도 g/cm3 3.2 3.1 3.3 3.2
수분 흡수율 ％ 0 0 0 0
굽힘 강도 MPa 580 900 1,020 790
비커스 경도 HV1 GPa 13.9 12.7 15.0 13.8
파괴 인성 （SEPB） MPam1/2 4 ～ 5 6 ～ 7 7 6 ～ 7
영률 (탄성계수) GPa 290 270 300 290
푸아송 비 – 0.28 0.28 0.28 0.28
선형 열팽창 계수 (40 – 800 °C)
팽창		 ×10-6/℃ 3.2 3.4 3.3 3.5
열전도율 （20℃） W/(m·K) 25 23 27 54
비열 J/(g·K) 0.64 0.66 0.65 0.66
내 열 충격성 ℃ 550 800 800 900
체적 저항률 （20℃） Ω·cm >1014 >1014 >1014 >1014

모든 XICRU 도가니

로더 아이콘

Sialon Westofen Dosing Tubes for Striko Westomat Furnaces – Superior Lifespan vs Aluminium Titanate, 2–3 Years Service, 12-Month Warranty.

Sialon Westofen Dosing Tubes are premium silicon nitride-based ceramic tubes specially manufactured for Striko Westofen and Westomat dosing furnaces in the molten non-ferrous industry (primarily aluminium at 660.3 °C melting point). They provide dramatically longer service life than standard Aluminium Titanate (AlTi) tubes, virtually eliminating clogging and reducing manufacturing downtime to a minimum.

Developed specifically to solve the short lifespan and frequent clogging problems of AlTi tubes in clean, closed Westomat systems, these low-thermal-conductivity Sialon tubes allow easy setup, operation and integration into any die casting or gravity casting line. The Westomat removes metal below the bath surface, preventing contamination – Sialon dosing tubes enhance this clean process with non-wetting surfaces, zero water absorption and outstanding corrosion/erosion resistance. Customers routinely report 2–3 years continuous service with minimal cleaning. Compatible with Sialon Immersion Heaters for furnace heating, ultrasonic degassing and hydrogen measurement devices.

Sialon’s unique composition (partial substitution of silicon by aluminium and nitrogen by oxygen) delivers superior properties over pure Si₃N₄: high strength, thermal shock resistance and durability in aggressive molten aluminium environments. Full technical specifications (ULTRA™ grades):

  • 부피 밀도: 3.1–3.3 g/cm³
  • 수분 흡수율: 0 %
  • 굽힘 강도: 580–1,020 MPa
  • 비커스 경도: 12.7–15.0 GPa
  • 파괴 인성: 4–7 MPa·m¹/²
  • 영률: 270–300 GPa
  • 선형 열팽창 계수 (40–800 °C): 3.2–3.5 ×10⁻⁶/°C
  • 열전도율 (20 °C): 23–54 W/(m·K)
  • 열충격 저항: 550–900 °C
  • 체적 저항률 (20 °C): >10¹⁴ Ω·cm

Since 1986, these tubes have been the preferred choice for foundries seeking maximum reliability, lowest maintenance and best price/performance. View Sialon Westofen Dosing Tubes – custom lengths, diameters and mounting options available on request. Standard 12-month warranty against chemical attack.

재료 데이터 시트 Sialon (Si3Al3O3N5)

대표적인 Sialon ULTRA™ 등급

 ULTRA-001 ULTRA-002 ULTRA-003 ULTRA-004
부피 밀도 g/cm3 3.2 3.1 3.3 3.2
수분 흡수율 ％ 0 0 0 0
굽힘 강도 MPa 580 900 1,020 790
비커스 경도 HV1 GPa 13.9 12.7 15.0 13.8
파괴 인성 （SEPB） MPam1/2 4 ～ 5 6 ～ 7 7 6 ～ 7
영률 (탄성계수) GPa 290 270 300 290
푸아송 비 – 0.28 0.28 0.28 0.28
선형 열팽창 계수 (40 – 800 °C)
팽창		 ×10-6/℃ 3.2 3.4 3.3 3.5
열전도율 （20℃） W/(m·K) 25 23 27 54
비열 J/(g·K) 0.64 0.66 0.65 0.66
내 열 충격성 ℃ 550 800 800 900
체적 저항률 （20℃） Ω·cm >1014 >1014 >1014 >1014

제품 설명

로더 아이콘

Sialon Westofen Dosing Tubes for Striko Westomat Furnaces – Superior Lifespan vs Aluminium Titanate, 2–3 Years Service, 12-Month Warranty.

Sialon Westofen Dosing Tubes are premium silicon nitride-based ceramic tubes specially manufactured for Striko Westofen and Westomat dosing furnaces in the molten non-ferrous industry (primarily aluminium at 660.3 °C melting point). They provide dramatically longer service life than standard Aluminium Titanate (AlTi) tubes, virtually eliminating clogging and reducing manufacturing downtime to a minimum.

Developed specifically to solve the short lifespan and frequent clogging problems of AlTi tubes in clean, closed Westomat systems, these low-thermal-conductivity Sialon tubes allow easy setup, operation and integration into any die casting or gravity casting line. The Westomat removes metal below the bath surface, preventing contamination – Sialon dosing tubes enhance this clean process with non-wetting surfaces, zero water absorption and outstanding corrosion/erosion resistance. Customers routinely report 2–3 years continuous service with minimal cleaning. Compatible with Sialon Immersion Heaters for furnace heating, ultrasonic degassing and hydrogen measurement devices.

Sialon’s unique composition (partial substitution of silicon by aluminium and nitrogen by oxygen) delivers superior properties over pure Si₃N₄: high strength, thermal shock resistance and durability in aggressive molten aluminium environments. Full technical specifications (ULTRA™ grades):

  • 부피 밀도: 3.1–3.3 g/cm³
  • 수분 흡수율: 0 %
  • 굽힘 강도: 580–1,020 MPa
  • 비커스 경도: 12.7–15.0 GPa
  • 파괴 인성: 4–7 MPa·m¹/²
  • 영률: 270–300 GPa
  • 선형 열팽창 계수 (40–800 °C): 3.2–3.5 ×10⁻⁶/°C
  • 열전도율 (20 °C): 23–54 W/(m·K)
  • 열충격 저항: 550–900 °C
  • 체적 저항률 (20 °C): >10¹⁴ Ω·cm

Since 1986, these tubes have been the preferred choice for foundries seeking maximum reliability, lowest maintenance and best price/performance. View Sialon Westofen Dosing Tubes – custom lengths, diameters and mounting options available on request. Standard 12-month warranty against chemical attack.

재료 데이터 시트 Sialon (Si3Al3O3N5)

대표적인 Sialon ULTRA™ 등급

 ULTRA-001 ULTRA-002 ULTRA-003 ULTRA-004
부피 밀도 g/cm3 3.2 3.1 3.3 3.2
수분 흡수율 ％ 0 0 0 0
굽힘 강도 MPa 580 900 1,020 790
비커스 경도 HV1 GPa 13.9 12.7 15.0 13.8
파괴 인성 （SEPB） MPam1/2 4 ～ 5 6 ～ 7 7 6 ～ 7
영률 (탄성계수) GPa 290 270 300 290
푸아송 비 – 0.28 0.28 0.28 0.28
선형 열팽창 계수 (40 – 800 °C)
팽창		 ×10-6/℃ 3.2 3.4 3.3 3.5
열전도율 （20℃） W/(m·K) 25 23 27 54
비열 J/(g·K) 0.64 0.66 0.65 0.66
내 열 충격성 ℃ 550 800 800 900
체적 저항률 （20℃） Ω·cm >1014 >1014 >1014 >1014

XICAR™ 소결 탄화규소 제품

로더 아이콘

Sialon Westofen Dosing Tubes for Striko Westomat Furnaces – Superior Lifespan vs Aluminium Titanate, 2–3 Years Service, 12-Month Warranty.

Sialon Westofen Dosing Tubes are premium silicon nitride-based ceramic tubes specially manufactured for Striko Westofen and Westomat dosing furnaces in the molten non-ferrous industry (primarily aluminium at 660.3 °C melting point). They provide dramatically longer service life than standard Aluminium Titanate (AlTi) tubes, virtually eliminating clogging and reducing manufacturing downtime to a minimum.

Developed specifically to solve the short lifespan and frequent clogging problems of AlTi tubes in clean, closed Westomat systems, these low-thermal-conductivity Sialon tubes allow easy setup, operation and integration into any die casting or gravity casting line. The Westomat removes metal below the bath surface, preventing contamination – Sialon dosing tubes enhance this clean process with non-wetting surfaces, zero water absorption and outstanding corrosion/erosion resistance. Customers routinely report 2–3 years continuous service with minimal cleaning. Compatible with Sialon Immersion Heaters for furnace heating, ultrasonic degassing and hydrogen measurement devices.

Sialon’s unique composition (partial substitution of silicon by aluminium and nitrogen by oxygen) delivers superior properties over pure Si₃N₄: high strength, thermal shock resistance and durability in aggressive molten aluminium environments. Full technical specifications (ULTRA™ grades):

  • 부피 밀도: 3.1–3.3 g/cm³
  • 수분 흡수율: 0 %
  • 굽힘 강도: 580–1,020 MPa
  • 비커스 경도: 12.7–15.0 GPa
  • 파괴 인성: 4–7 MPa·m¹/²
  • 영률: 270–300 GPa
  • 선형 열팽창 계수 (40–800 °C): 3.2–3.5 ×10⁻⁶/°C
  • 열전도율 (20 °C): 23–54 W/(m·K)
  • 열충격 저항: 550–900 °C
  • 체적 저항률 (20 °C): >10¹⁴ Ω·cm

Since 1986, these tubes have been the preferred choice for foundries seeking maximum reliability, lowest maintenance and best price/performance. View Sialon Westofen Dosing Tubes – custom lengths, diameters and mounting options available on request. Standard 12-month warranty against chemical attack.

재료 데이터 시트 Sialon (Si3Al3O3N5)

대표적인 Sialon ULTRA™ 등급

 ULTRA-001 ULTRA-002 ULTRA-003 ULTRA-004
부피 밀도 g/cm3 3.2 3.1 3.3 3.2
수분 흡수율 ％ 0 0 0 0
굽힘 강도 MPa 580 900 1,020 790
비커스 경도 HV1 GPa 13.9 12.7 15.0 13.8
파괴 인성 （SEPB） MPam1/2 4 ～ 5 6 ～ 7 7 6 ～ 7
영률 (탄성계수) GPa 290 270 300 290
푸아송 비 – 0.28 0.28 0.28 0.28
선형 열팽창 계수 (40 – 800 °C)
팽창		 ×10-6/℃ 3.2 3.4 3.3 3.5
열전도율 （20℃） W/(m·K) 25 23 27 54
비열 J/(g·K) 0.64 0.66 0.65 0.66
내 열 충격성 ℃ 550 800 800 900
체적 저항률 （20℃） Ω·cm >1014 >1014 >1014 >1014

추천 제품

소결 탄화규소 열전대 보호관 1
, , ,
XICAR® 소결 탄화규소 열전대 보호관
옵션 선택
, , ,
XICAR® 소결 탄화규소 열전대 보호관
옵션 선택
Sialon ULTRA™ 열전대 보호관 | 질화규소 열전대 보호관 | 세라믹 열전대관 | 열전대용 세라믹 튜브
, , , ,
시알론 ULTRA™ 열전대 보호관
옵션 선택
, , , ,
시알론 ULTRA™ 열전대 보호관
옵션 선택
Sialon 히터 튜브 | 질화규소 히터 튜브 | 세라믹 히터 튜브
, ,
Sialon 히터 튜브
옵션 선택
, ,
Sialon 히터 튜브
옵션 선택
Sialon 라이저 튜브 | 질화규소 라이저 튜브 | 라이저 튜브 | Sialon 라이저 스토크
,
Sialon 라이저 튜브
옵션 선택
,
Sialon 라이저 튜브
옵션 선택
Sialon 질화규소 아연도금 후크
, ,
Sialon 질화규소 아연도금 후크
옵션 선택
, ,
Sialon 질화규소 아연도금 후크
옵션 선택
사이알론 압출 다이 | 질화규소 압출 다이 | 최고의 질화규소 압출 다이
, ,
Sialon 압출 다이
옵션 선택
, ,
Sialon 압출 다이
옵션 선택

왜 우리인가?

합리적인 배송 기간

보통 4주 이내에 배송합니다

12개월 보증

용융 알루미늄 배스에서

24/7 지원

1986년부터

품질 환경 시스템 ISO 14001
더 알아보기

1986년부터의 기술 세라믹

Sialon 제품

XICAR™ 소결 탄화규소

전화 주세요!

스웨덴 / 스베리예

+(46) 31 754 0790

덴마크

+(45) 35 15 8085

미국/캐나다 무료 전화

+ 1 (833) 709-1399

©2025 판권 소유. Sialon Ceramics Denmark ApS

최신 뉴스 받기

회사를 등록하면 저희에게서 두 번째 제품을 구매할 때 40% 할인을 받으세요!

시알론 히터 튜브, 시알론 침지 히터, 시알론 라이저 튜브 및 맞춤 제작 제품에만 적용됩니다. 제한 사항이 적용될 수 있습니다.

등록